Tips on How to Re-Install Windows XP SP 2

Some of the friends I, who can use the Windows Operating System Windows disistem how to install their own computers. Maybe for some people it is very easy but for ordinary users is very difficult because of the habit of installing the computer was missing. This article was I to anyone who wants to learn how to install his own computer by right without fear of making mistakes because I've included a tutorial with pictures that are very easy to understand.

Minimum hardware specifications are required:

Pentium Processor 1.5 Ghz / AMD equivalent
CDROM / DVDROM drive
128 MB RAM
Previously you needed a master Windows XP CD first and then input in the CDROM / DVDROM you. Then restart your computer, then appears to look like the image and press the Delete key on the keybord so that you can enter the BIOS (Basic Input Output System) computer. In some types of Mainboard must press the F2 key on the keyboard. You can see it on the command Press DEL to run Setup.
Then you will be in the BIOS and then select Boot on the menu and select Device Priority itemBoot as shown.
After that you change the [CDROM] in the position of 1st Boot Device to boot from the CD-ROM by using the + - in keyboard.Lalu press F10 to save your configuration.
Restart the computer, wait until it says something like this and then press any key quickly.
After the following display and press Enter to go on the install or repair Windows Runtuk in Recovery consule or F3 to end the install process.
Continue on Lisencing Agreement for further press F8 and ESC to abort the process
In the figure the position of the partition has not been filled by the system windows.Tekan C to create a new partition on the hard drive and Enter to install.
Then input how much capacity you want to create partitions in units of megabytes (MB) and press Enter to create a partition as shown in the picture
Then press Enter to do the install or Delete to delete the partition.
And select the NTFS file system (Quick) or FAT file system (Quick) and press Enter.
When the installation process step 1 → 10 true then it will look like the picture.
After that you arrive at the following screen Click Next.
Then fill in with Name and Organization You then press Next.
Here you will fill in the Product Key or Serial Numbers of the type of windows you press Next again.
Enter the computer name and password to access it and press Next.
Set Time Zone at the position (GMT +80:00), click Next.
Typical settings: In this option will be made the default network settings windows danCustom settings: For setting up your network manually and then click Next.
When you connect kejaringan locally with a domain select the option Yes, then fill with the same name DOMAIN DOMAIN network and vice versa if you do not connect kejaringan or connected but without DOMAIN select the option No, once again press Next.
Next Kamutinggal click Ok, Next, Skip and Finish are also asked to fill in your name. until you are on the Windows desktop display like this. Now you live CPU you install hardware drivers.